How To Disassemble The Gaming Chair

When a computer gaming chair is too old, it is not as supportive or comfortable as it All chairs are different and come apart in different ways, but we have compiled a list of instructions for the most popular makes and models.

The following instructions are meant to be a guideline, not an exact science. Some chairs can be disassembled with just a screwdriver while others may require a bit more force. Some chairs may even have a combination of screws and bolts. For these situations, we recommend you use caution when disassembling your chair to avoid damage to the chair or yourself.

Our top 3 recommendations for comfortable PC gaming chairs are:

1) AKRacing Chair — Best PC Gaming Chair

2) X-Rocker Chair — Best Rocker Gaming Chair

3) DX Racer Chair — Best Office Chair

Should be You need to disassemble the chair if you want to fix it. Here are some steps you can follow:

1. Remove the screws from the chair.

2. Open the chair and remove the screws of its backrest.

3. Remove the screws of its base and then remove the leg rest from each side of the base.

4. Use a screwdriver to take out all eight screws on the seat board and lay it aside in a safe place.

5. Lift up each side of the base and find two plastic nuts under each armrest, unscrew them with pliers or your fingers and take out two sets of armrests by hand.

You will have to disassemble your computer chair to clean it. Do not use water to clean the chair, because it could cause the foam padding to deteriorate. You can use a vacuum cleaner for small crevices and for the other parts of the chair, use a damp cloth or a paper towel moistened with water. For stubborn stains, you can also use rubbing alcohol or vinegar, but again, don’t soak the entire chair in them. If needed, you can also use a mild detergent and then wipe it off with a dry cloth.

Tighten all screws before putting them back together. Make sure that the screws are put in tightly so that they won’t vibrate loose during usage. It is also important to make sure that the screws are placed in their correct locations so there would be no misplacement of any of those parts during reassembly. Make sure that all cables are properly seated and secured into position. Lastly, check if all buttons and switches on your gaming chair work before putting back its cover.

CLICK HERE to learn more…